HOMCOM A91-131 Assembly Instruction Manual page 12

Step 5:
•
Insert Q in M and install 2 x foam rollers (22) and Ø 25 mm tube plug (16) and 1 x 45x45 tube
plug (13).
•
Insert 2 x Q, 4 x foam rollers (22), 5 x Ø 25 mm round tube plugs (16).
•
Install M and N with 1 x M10x75 screw, nut, and washer (2).
•
Insert M in the main body and adjust the height with the popper pin (26).
Step 6:
•
Install P and T on part O with 2 x M10x65 screws, nuts, and washers (4) and 4 x M8x20 screws,
nuts, and washers (9).
•
Adjust the height with popper pin (26) after inserting into part O.
~ 8 ~