Install the Mixer (Wall Mounted )
Note! When wall mounting the mixer it should be noted that the product
is supported by the pipework only.
1.
Make sure the hot and cold mains supply are turned off. Install the
connectors in the wall and connect to the hot and cold supply (hot
supply to left, cold supply to right).
2.
Make sure that the connectors are level and set at the correct distance
apart.
3.
Position the seals into the mounting nuts on the back of the mixer.
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.c
Spirit Level
Seal
Mixer
11
150mm
P3911150
P4297050
P4297