Table of Contents
Advertisement
Spray Plate Assembly — Internal
Remove the spray plate assembly. Refer to Spray Plate, Removal
1.
and Installation.
2.
Remove the inner and outer nozzle ring retainers.
3.
Clean the components with a stiff brush. If necessary use a plastic
kettle descalent in accordance with the manufacturer's instructions.
Flush thoroughly with water before the shower is used.
4.
If necessary replace the 'O' seals.
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.c
21
P4297
Handset Body
Assembly
Outer Nozzle
Ring Retainer
'O' Seals
Inner Nozzle
Ring Retainer
Spray Plate
Assembly
Adjuster Ring
P4302210
Advertisement
Table of Contents
