Table of Contents
Advertisement
Spray Plate Installation
Teeth
1.
Make sure that the four 'O' seals are all correctly fitted.
2.
Fit the inner nozzle ring retainer onto the spray plate assembly.
3.
Fit the outer nozzle ring retainer onto the flow divertor.
4.
Turn the flow divertor fully clockwise.
5.
Carefully screw the spray plate assembly onto the flow divertor.
6.
Align the inner teeth on the adjuster ring with the teeth on the handset
flow divertor. Clip the adjuster ring into position.
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.c
'O' Seals
Inner Nozzle
Ring Retainer
'O' Seals
23
Spray Plate
Assembly
Outer Nozzle
Ring Retainer
Adjuster Ring
Inner Teeth
P4302240
P4297
Advertisement
Table of Contents
