Sealing
Plate
Apply
Sealant
3.
Place the sealing plates over the threaded section of the column
connectors.
4.
Apply a ring of sealant in accordance with the manufacturer's
instructions underneath the sealing plates.
5.
Fit the mixer through the top of the bath.
6.
Install the washers and the locknuts. Use a tap spanner to tighten the
nut.
7.
Remove any excess sealant.
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.c
Washer
10
P4297
Locknut
P4297040