Inserting New Batteries; Figure 3. Inserting New Batteries - Respironics 950 Instruction And Service Manual

Inserting New Batteries

1. Loosen the screw at the end of the 950 using a coin or a standard
flat screwdriver and remove the battery door.
2. Remove the old batteries and dispose of them properly.

Figure 3. Inserting new batteries.

3. Insert two new AAA batteries following the polarity markings
indicated on the battery door or bottom label of the 950. Proper
positioning of the batteries is critical.
4. Carefully position the battery door and firmly, but gently tighten
the screw. Do not force the door into place. The door only fits
when properly oriented. To avoid stripping screw threads, do not
tighten excessively.
5. Insert your finger into the 950 and verify operation. If the unit
does not turn on, remove the finger and wait two seconds before
reinserting a finger.
6. If the 950 still does not work, reinstall the batteries.
10