Lanyard And Lanyard Lock; Figure 2. Lanyard And Lock - Respironics 950 Instruction And Service Manual

Lanyard and Lanyard Lock

A lanyard is provided for the convenience of wearing the 950 around
the neck or wrist. The 950 will function with or without the lanyard.
1. Thread the ends of the lanyard through the lanyard holes as shown
below in Figure 2.
2. Push in the lanyard lock button, slide the lock onto the lanyard up
to the desired length.
3. Release the lock button to secure its position.
4. Reverse this procedure to remove the lanyard.

Figure 2. Lanyard and lock.

NOTE:
The lanyard must cross over the top of the 950 to permit full
opening of the sensor.
8