Maintenance
The advanced digital circuitry within the Respironics 950 requires no
calibration or periodic maintenance other than battery replacement.
Field repair of the 950 circuitry is not possible. DO NOT attempt to
open the 950 case or repair electronics. Opening the case will damage
the 950 and void the warranty. If the 950 is not functioning properly,
refer to page 22, Troubleshooting Guide.
CAUTION:
A flexible circuit connects the two halves. Do not twist or pull on
the flex circuit.
CAUTION:
Do not immerse the 950 in liquid to clean.
NOTE:
The 950 may be sterilized using ethylene oxide (EtO) (cold cycle).
Remove the battery door and batteries before EtO sterilization.
Follow the instructions on page 10, Inserting New Batteries.
NOTE:
Hold the 950 top and bottom together when the spring is released.
The two halves are held together by the flex circuit only.
Storage Requirements
Store the 950 within the stated temperature and humidity storage
specifications. Refer to page 19, Specifications.
CAUTION:
Batteries must be removed if the 950 is going to be stored for more
than one month or batteries may leak.
14