Indicates whether the recorded raw data files are uploaded to an external FTP
FTP Push
server ("On") or not ("Off").
Column #8
Date
Current date (YYYY-MM-DD)
Time
Current local or UTC time (hh:mm:ss) according to the setting below.
Blank area if no alarm has been detected.
"Alarms" displayed if an alarm has been detected in the receiver, followed by the
Alarm report
number of raised alarms, between brackets (x).
A click on "Alarms" will open the Status-Alarms web page to list this or these
alarms.
To change the units, select your preference from the Units
pane on the left-hand side of the Web Server window. This
pane is visible in both the Status and Configuration tabs.
Distance Units
• Meters
• US Survey Feet
• International Feet
Angle Units
The possible formats for angles, including latitudes and
longitudes, are the following:
• Degrees (Deg.)
• Degrees, minutes (Deg. Min.)
• Degrees, minutes, seconds (Deg. Min. Sec.)
The format of latitude and longitude depends on the chosen
angle unit. The corresponding formats are described in the
table below.
Angle Unit
Used
Deg.
Deg. Min.
Latitude Format
DD.DDDDDDDD° N or
DD.DDDDDDDD° S
DD°MM.MMMMMM' N or
DD°MM.MMMMMM' S
Longitude Format
DDD.DDDDDDDD° E or
DDD.DDDDDDDD° W
DDD°MM.MMMMMM' E or
DDD°MM.MMMMMM' W
39
Need help?
Do you have a question about the ashtech ProFlex 800 CORS and is the answer not in the manual?