Spectra Precision ashtech ProFlex 800 CORS Getting Started Manual page 41

also be saved as a D-files, in which case the D-files are saved
in the same subdirectory as the corresponding G-files. Sensor
data can also be output through the NMEA XDR message
type.
External sensors can be connected to the ProFlex 800 using
multi-function serial cable P/N 702450 (3 meters in length).
This cable has bare wires at one end, and a circular, seven-
contact connector at the other end. The pinout is as shown in
the diagram below.
Circular Connector
RS422 RS232
TXD+ RTS
TXD- TXD
RXD+ RXD
RXD- CTS
PPS- EVENT
GND GND
12 V DC 12 V DC
Shield (case)
7-Contact
4
6
5
3
7
2
1
Yellow
Pink
Gray
Green
Blue
Brown
White
Black
35