Rear View - Spectra Precision ashtech ProFlex 800 CORS Getting Started Manual

Log Button. Press this button briefly to start recording raw
data on the selected storage medium.
Another short press on this button will immediately stop raw
data recording.
Scroll button. Press this button briefly to scroll through the
different pages of information viewed on the screen.
If an alarm is reported on the display screen, a short press on
the Scroll button will acknowledge the alarm. The Scroll
button will recover its display scrolling function only after all
the alarms have been acknowledged this way.
Another function of the Scroll button is to re-activate the
screen backlight after the latter has automatically been
turned off. The Scroll button is also used in the firmware
update procedure.

Rear View

[9] [3] [4] [5] [7] [1]
[6] [8] [2] [10]
DC Power Input. A Fischer, three-contact, female connector
[1] allowing the ProFlex 800 to be powered from either the
provided AC adapter (connect the cable extension between
ProFlex 800 and the end of the AC adapter output cable), or
an external 9- to 36-V DC power source through cable P/N
730477 (cf. base setup using an external radio transmitter).
GNSS Input #1 . A TNC coaxial female connector [2] allowing
you to connect a GNSS antenna to the receiver via a coaxial
cable.
7