Power-On Screen; General Status Screen - Spectra Precision ashtech ProFlex 800 CORS Getting Started Manual

Power-On Screen

When you power on the receiver, the Ashtech logo appears on
the screen. It is displayed until the receiver has completed its
auto-test (this takes about 30 seconds).
Then the General Status screen is displayed.

General Status Screen

An example of General Status screen is shown below.
[1]
[7]
This screen displays the following information:
• : Satellite icon [1] (always displayed).
• Number of satellites tracked [2].
• BASE [3]: A label indicating that the receiver is used as a
base.
• Number of satellites used [4]: Number of satellites
processed by the reference station and for which
corrections are made available to users. These satellites
are also used to compute an SDGPS solution of the base
position. This solution is permanently available on the
position computation screen (see Position Computation
Screen on page 16).
[2] [3]
[8] [9] [10] [11]
[4]
[6]
[5]
13