Install The Attachment-Type Customer Display (Yuno-Ii-Lcm) And Second Display (Yuno-Ii-2Ndlcd10.1) - AURES YUNO II User Manual

6.2 Install the Attachment-type Customer Display (YUNO-II-LCM)
and Second Display (YUNO-II-2NDLCD10.1)
The Attachment-type Customer Display (YUNO-II-LCM) and Second Display
(YUNO-II-2NDLCD10.1) can be installed from the rear top side of the system. Make
sure the unit is powered off before starting.
Please follow the below steps to finish the installation:
1. Open the rear cover
2. Remove the rear top door of the rear cover.
3. Connect the Customer Display cable with the connector of the system. Locate this
connection properly.
4. Insert the Customer Display in place and fasten two screws to make it
Installed with YUNO-II-LCM
YUNO-II user manual v1.1
Installed with YUNO-II-
2NDLCD10.1
34
secure.