Second Display Installation - AURES Odysse II User Manual

3.4. Second Display Installation

To Install the Second Display, first remove the back cover of the system (see chapter 3.3
steps a, b, c, and d). Remove the base cover and the hard disk/auxiliary fan tray (see
chapter 4.1 steps a-b, and chapter 4.3 step a.)
nd
a. ￿ 2 Display, ￿ VGA Cable, ￿ ferrite core
and ￿ power extender cable. For easier
assembly, connect ￿ VGA Cable to ￿ power
extender cable by the four-pin
connector(marked by yellow circles).
c. Press the VGA cable firmly along the groove
and behind the cable hook. Connect the
VGA cable as shown in the picture.
b. Rear View of 2
for cable management.
d. Route the cable through the hole of the
back cover.
16
nd
Display and the groove