Kernau KDI 6443 I User Manual page 53

Cancelling a Programme
Follow the steps below to cancel a programme while in operation.
Switching the Machine Off
CAUTION
Do not open the door before the programme is complete.
CAUTION
If the door of the machine is opened or the power is cut off while a programme is in operation,
the programme will continue when the door is closed or the power returns.
CAUTION
If the power is cut or the machine door is opened during the drying process, the programme
will terminate. Your machine will now be ready for a new programme selection.
When the door of your machine is opened,
the light corresponding to the most recently
selected programme will illuminate.
Press and hold the Programme Selection button
for 3 seconds. The End Of Programme Indicator
will flash and the programme light will switch off.
The water discharge process will start after
the door of the machine is closed and will
continue for 30 seconds. A buzzer will sound 5
times when a programme is cancelled and the
End Of Programme Indicator will illuminate.
The End Of Programme Indicator will illuminate
when a programme is complete. A signal will also
sound 5 times. You can then switch your machine
off using the Power On/Off button.
Disconnect the plug and turn off the water
tap.
53