Canvac Q Air CFK5301V Use Instructions page 13

Remote Control Function
Function
On/Off
UV-C Sterilization
Oscillation
Timer mode
Sleep mode
Warm mode
Cool mode
© 2022, Elon Group AB. All rights reserved.
Button Description
• In Standby mode, press once to turn on product.
• When product is operating, press once and product
will turn off and return to Standby mode.
• Press once to turn on UV-C Sterilization function.
• Press again to turn off UV-C Sterilization function (UV
Sterilization function will automatically turn off after
operating for 1 hr).
• Press once to turn on Oscillation function, oscillation
angle is 80° ± 5°.
• Press again to turn off Oscillation function.
• Press this button to set countdown until fan is turned
off (1–8 hr). When countdown completes, the product
will automatically stop operating.
• Press once to enter Sleep mode. LED display will show
"LL" and airflow will decrease to the lowest level.
• In Warm mode, this button does not respond.
• Press again to exit Sleep mode
• Press once to switch to Warm mode.
• In Warm mode, press +/- to adjust temperature between
1–30°C.
• In Cool mode, this button does not respond.
• Press + to increase airflow; press – to decrease airflow.
• Warm mode has 4 levels of airflow.
• Press once to switch to Cool mode.
• Press + to increase airflow; press – to decrease airflow.
• Cool mode has 9 levels of airflow.
13