DEMAG DRF 200 Assembly Instructions Manual page 50

XENGLIFR
Subject to change. No liability for errors or omissions
Declaration for fitting partly completed machinery
according to Machinery Directive 2006/42/EC, Annex IIB
Hereby we,
Demag Cranes & Components GmbH
Forststrasse 16, 40597 Düsseldorf, Germany
declare that the electric travel drive for driving Demag trolleys
Demag DRF 200 travel drive
supplied as partly completed machinery is intended to be incorporated into machinery and its
initial bringing into service is prohibited until the machinery* into which this partly completed
machinery is to be incorporated has been declared in conformity with all relevant provisions of
EC Machinery Directive 2006/42/EC.
(* insofar as this machinery is subject to the scope of application)
Basic requirements of the EC Machinery Directive, insofar as they are relevant for the scope of
delivery, are met by application of the following harmonised standards or C standard drafts:
EN 14492-2
EN 60204-32
The safety objectives of Low Voltage Directive 2014/35/ U are achieved
The product additionally complies with the following relevant directives/provisions:
EU EMC Directive
The special technical documentation according to Annex VII Part B of Directive 2006/42/EC has
been compiled and will be made available to authorised national authorities by the designated
authorised representative in response to a justified request.
Authorised representative for technical documentation
Hans-Jörg Böttcher, Demag Cranes & Components GmbH, Forststrasse 16, 40597 Düsseldorf,
Germany
Düsseldorf, 13.07.2018
ppa. Thomas Wiesmann i.V. Franz Schulte
Head of Plant Wetter
Industrial Equipment
Original
Cranes - Power driven winches and hoists -
Part 2: Power driven hoists
Safety of machinery - Electrical
equipment of machines - Part 32:
Requirements for hoisting machines
2014/30/EU
Knowledge Centers &
Core of Lifting
Ident. number / Language
19962044 / EN
Issue Page
1217 1/ 1