Emerson E2 Quick Start Manual page 9

3. After setting and saving the device address, press
 
4. Press ,
and Motor FLA from the motor plate of the device.
Document Part # 026-4950 Rev 0 08-OCT-2014
©2014 Emerson Climate Technologies Retail Solutions, Inc. This document may be photocopied for personal use.
Visit our website at http://www.emersonclimate.com/ for the latest technical documentation and updates.
Figure 9 - Device Status Screen

, to shift over to the Setpoints tab. Set values for Motor Voltage, Motor RPM
Figure 10 - Setpoints Tab

to go to the Status screen.
Page 9 of 14