Emerson E2 Quick Start Manual page 5

STEP 4: Setting the Baud Rate in the E2 Controller
 
1. Press ,


2. Press (NEXT TAB) to shift over to the Serial tab. Select COM port, then set Baud rate to 19200,
Data Size to 8, Parity to None and Stop Bits to 1.
Document Part # 026-4950 Rev 0 08-OCT-2014
©2014 Emerson Climate Technologies Retail Solutions, Inc. This document may be photocopied for personal use.
Visit our website at http://www.emersonclimate.com/ for the latest technical documentation and updates.
(System Configuration),
Figure 4 - Set the Baud Rate, Data Size, Parity and Stop Bits

(Remote Communication) and


(TCP/IP Setup).
Page 5 of 14