Develop ineo 4422 Quick Reference page 2

Make a copy
1. Load the original(s) into the ADF or on the scanner
glass.
2. Tap Copy on the home screen.
3. Specify the number of copies.
4. If necessary, adjust the copy settings.
5. Press the Start key or tap Copy.
Reduce/enlarge copies
1. Load the original(s) into the ADF or on the scanner
glass.
2. Tap Copy on the home screen.
3. Tap Settings.
4. Tap Scale.
5. Make the desired settings.
6. Press the Start key or tap Copy.
ineo 4422
Copy Settings*
Adjust scaling factor
Specify 1-sided or 2-sided
Copy multipe pages on one sheet
Adjust the darkness
Select content type
and content source
Specify duplex/orientation/flip style
Output copy sets in a sort order
Insert blank separator sheets
Specify overlay text
*Available functions depend on system configuration.
Make two-sided copies
1. Load the original(s) into the ADF or on the scanner
glass.
2. Tap Copy on the home screen.
3. Tap Settings.
4. Tap Paper Setup.
5. Make the desired settings.
6. Press the Start key or tap Copy.
Set up front cover and back cover
Allow edge-to-edge scanning
Adjust sharpness/contrast/shadows
Set mirror image, negative image or auto center
Collate copies
1. Load the original(s) into the ADF or on the scanner
glass.
2. Tap Copy on the home screen.
3. Tap Settings.
4. Tap Collate.
5. Make the desired settings.
6. Press the Start key or tap Copy.
Adjust margins
Set up header and footer
Set up width of edge erase
Remove background
Select color to remove
Adjust the copy quality
1. Load the original(s) into the ADF or on the scanner
glass.
2. Tap Copy on the home screen.
3. Tap Settings.
4. Tap Content.
5. Select Content Type and Content Source.
6. Press the Start key or tap Copy.
Quick Reference 2/3