Displaying And Maintaining Mld Snooping - H3C S5500-SI Series Manual

Operation Manual – Multicast Protocol
H3C S5500-SI Series Ethernet Switches
Enter MLD Snooping view
Configure IPv6 multicast
group replacement
II. Configuring IPv6 multicast group replacement on a port or a group ports
Follow these steps to configure IPv6 multicast group replacement on a port or a group
ports:
Enter system view
Enter
correspondin
g view
Configure IPv6 multicast group
replacement

2.7 Displaying and Maintaining MLD Snooping

View the information of
IPv6 multicast groups
learned
Snooping
View
information
messages learned by
MLD Snooping
Clear MLD Snooping
entries
Clear
information of all kinds
of MLD
learned
Snooping
To do...
mld-snooping
overflow-replace [ vlan
vlan-list ]
To do...
Enter Ethernet
por t view
the
Enter port
group view
To do...
display
group [ vlan vlan-id ]
by MLD
[ verbose ]
the statistics
of MLD display
statistics
reset mld-snooping group
{ ipv6-group-address | all }
[ vlan vlan-id ]
the statistics
reset
messages
statistics
by MLD
Chapter 2 MLD Snooping Configuration
Use the command...
Use the command...
system-view
interface interface-type
interface-number
port-group {
port-group-name
aggregation agg-id }
mld-snooping
overflow-replace [ vlan
vlan-list ]
Use the command...
mld-snooping
mld-snooping
mld-snooping
2-19
Remarks
—
Required
Disabled by default
Remarks
—
Use
manual
command
|
Required
Disabled by default
Remarks
Available in any view
Available in any view
Available in user view
Available in user view
either