Table of Contents
Advertisement
Remove the iris plate of the
[5]
engine block.
Loosen the four clamping screws to
remove the iris plate.
Do not loosen any screws other than those
specified.
Remove the iris screws.
[6]
Iris plate is provided with a default iris.
Remove 3 screws from the iris.
Mount the small iris.
[7]
Use 3 screws you have removed at Step
[6] to mount the small iris among
accessories with overlapping it over the
iris.
Remount the iris plate now
[8]
attached with the small iris
to the engine block.
Use 4 screws you have removed at Step
[5] to mount the iris plate.
Remount the fixing-use
[9]
bracket.
<1> Align the convex portion of the
fixing-use bracket with the concave
portion of the projector.
<2>
Use 3 screws you removed at Step
[5] to fix the fixing-use bracket.
2. Setting Up Your Projector
Concave
portion
Convex
portion
95
Advertisement
Table of Contents
