Table of Contents
Advertisement
Preparations: Display the zoom/focus adjustment screen by using the following procedure.
［1］Press the MENU button on the projector's control panel.
［2］Select "Configuration" menu using LEFT the LEFT/RIGHT button.
［3］Press the DOWN button.
［4］Select "Lens Control" using the LEFT/RIGHT button.
［5］Press the DOWN button.
［6］Press the ENTER button.
Press the LEFT/RIGHT buttons to
[1]
roughly adjust the screen size so that
the screen height and the image
height are the same.
Press the UP/DOWN buttons to
[2]
roughly adjust the focus.
Adjust the surface on which the
[3]
projector is set up and the tilt foot of
the projector to adjust the setup
position, height, and tile (front-back
and left right) of the projector so that
the projected image is level at the
screen center.
Use the LEFT/RIGHT buttons again to
[4]
adjust the screen size so that the
projected image is kept 0.5 to 1
crosshatch cell portions higher than
the top edge of the screen.
Finally adjust the focus using the
[5]
UP/DOWN buttons.
116
"Title Select" appears on the projector's LC display.
"Focus Zoom" is displayed and you can adjust the focus/zoom.
3. Projector Adjustment and Connection
Advertisement
Table of Contents
