Intenza+" Water Filter Installation - Gaggia Milano ANIMA User Manual

ENGLISH
10
ON
OFF
4219-465-09541 MANUAL GAG. ANIMA PLUS EN-ES-PT Rev 00.indd 10

"INTENZA+" Water Filter Installation

Immerse the "INTENZA+" water filter vertically in cold water (with the opening in
upward position) and gently press its sides to let the air bubbles out.
Set the "INTENZA+" water filter according to the measurements performed (see
"Measuring the water hardness") and indicated on the base of the filter:
A = soft water – equals 1 or 2 small squares
B = hard water (standard) – equals 3 small squares
C = very hard water – equals 4 small squares
Insert the "INTENZA +" water filter in the empty water tank and push it down to the
lowest point.
Fill the water tank with running water and put it back into the machine.
Dispense all the water in the water tank by using the hot water function (see the
"Dispensing Hot Water" chapter).
Then, fill the tank again.
1 Press the MENU button and scroll until selecting the water filter. Press the OK
button.
2 Select ON, then press OK and exit from the menu.
06/04/2022 11:13:08