Intenza+" Water Filter Installation - Gaggia Milano NAVIGLIO HD8749 User Manual

Table of Contents

Advertisement

Available languages

Available languages

ENGLISH
10
4219-450-01931 MANUAL GAG. NAVIGLIO HD8749 EN-ES-PT.indd 10
6
Press the "
" button to start dispensing hot water.
7
Dispense water until the no water light "
8
At the end, fill the water tank again up to the MAX level. Now the machine is
ready for coffee brewing.
Note: If the machine has not been used for at least two weeks, it will automatically
perform an automatic rinse/self-cleaning cycle. Following this, you need to initiate
a manual rinse cycle as described above.
The automatic rinse/self-cleaning cycle also starts automatically when the
machine has been in stand-by mode or turned off for more than 15 minutes.
At the end of the cycle, it is possible to brew a coffee.

"INTENZA+" water filter installation

We recommend installing the "INTENZA+" water filter as this prevents limescale
build-up and preserves a more intense aroma to your espresso coffee.
The INTENZA+ water filter can be purchased separately. For further details, please
refer to the maintenance products page in this user manual.
Water is a crucial part of every espresso, so it is very important to always have
it professionally filtered. Using the "INTENZA+" water filter will prevent mineral
deposits from building up and improve your water quality.
1
Remove the small white filter from the water tank and store it in a dry place.
" is permanently on.
03/12/2018 12:33:09

Advertisement

Table of Contents
loading

Table of Contents