Hatco FLAV-R-SAVOR FSHC-6W Series Installation And Operating Manual page 10

INSTALLATION
Stainless Steel Door
(Optional on FSHC-6W Series Only)
The optional stainless steel door is not available for
retrofit.
1. Slide hinge covers off of edgemount hinges.
(See Figure 6.)
NOTE: Hinges remain mounted to the stainless
steel door.
2. Remove the screws securing the chrome handle
to the door.
3. Remove the screws securing the strike plate to
the cabinet.
4. Remove screw plugs from the right side of the
cabinet and insert in left side.
5. Rotate the door 180° and install on the right side
of cabinet using the original hardware.
6. Secure strike plate on the right side using the
original hardware.
8. Secure handle to the door in the upright position
using the original hardware.
9. Slide hinge covers back into place on the
hinges.
Form No. FSHC67M-0808
All manuals and user guides at all-guides.com
8
Strike Plate
Chrome Handle
Hinge
Figure 6. Reversible Access Door - Stainless Steel Door
(Optional on FSHC-6W series only))
Hinge Cover