Omegasonics PowerLift 4560 Operation & Instruction Manual page 8

·
Setting Time Clock
·
Press HEAT TIME CLOCK
·
The days of the week will display as follows:
MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY SATURDAY SUNDAY
OFF OFF
·
Red day button indicates that day is inactive and is displayed as OFF.
·
Green day button indicates that day is active. And is displayed as ON.
·
NOTE: Upon initial power up of the unit, any time after a power outage or any
time after the E-STOP is depressed, the days of the week will automatically
cycle to the OFF position and must be reset to the ON position.
·
Press HEAT START TIME
·
A numeric screen will display to the right.
·
Input the desired start time (increments in hours and minutes) by pressing the
appropriate numbers 1 - 24.
·
Time Clock is based on a 24 hour military time clock.
·
Press HEAT OFF TIME
·
A numeric screen will display to the right.
·
Input the desired start time (increments in hours and minutes) by pressing the
appropriate numbers 1 - 24.
·
Factory Preset Start time is 05:00. Stop time 19:00
·
TANK TEMP. CALIBRATION is factory set at 8 and should not be changed.
OFF OFF OFF OFF OFF
8