Table of Contents
Advertisement
CLEANING AGENTS
Omegasonics carries a full line of cleaning agents. Each cleaning agent has a unique
cleaning specialty and use. Some of the products are as follows.
·
OmegaClean – General to heavy-duty degreaser which will remove carbon, oil,
grease and dirt from a variety of metals and will not harm aluminum finishes.
Especially formulated for the aerospace industry as well as for automotive
applications. Has built in conditioners for hard water (high calcium and magnesium
content) sources and good quality rust inhibitors.
·
OmegaBrite – Heavy-duty degreaser removes carbon, oil, dirt, grease and dirt from
a variety of metals. It is excellent for cleaning and brightening ferrous and nonferrous
metals. Product may cause aluminum to scar if left in contact with aluminum part for
an extended period of time. Should not be used with copper or copper alloy
substrates. Product contains a short-term flash rust inhibitor.
·
OmegaZyme – Ideal for industrial applications cleaning oil and grease from
aluminum, stainless steel and titanium parts. Does not remove carbon. Will cause
cast iron and cold rolled steel parts to rust if not used in conjunction with silicate,
nitrate or trisodium phosphate rust inhibitors or with another cleaning agent
containing rust inhibitors.
·
OmegaCitriSurf 2250– Designed for industrial and aerospace applications where
stainless steel passivation (the removing of free iron from the surface) is required.
Also useful in removing calcium deposits from a variety of metals including brass and
steel.
·
Omega DeScaler - A unique product formulated to remove rust, corrosion, heat
scale and mineral deposits from a variety of metals. Excellent when used in an
ultrasonic tank to remove rust from metal components exposed to extreme moisture
and water. Effectively used to remove mineral deposits from heat exchangers
·
Omega Mold Release - A high pH concentrated cleaning agent used successfully to
remove burnt-on crystalline rubber, plastic and food from molds, dies and other metal
surfaces
·
OmegaBlue - Designed to remove ink and ink residue from metal and rubber
components including Anilox rollers.
The above products are concentrates. These products are formulated for use at a
10:1 ratio. Ten parts water versus one part cleaning detergent.
12
Advertisement
Table of Contents
