–
Do not use seat or head restraint cov-
ers.
–
Do not hang objects, for instance
clothes hangers, directly on the head
restraint.
–
Only use accessories that have been
determined to be safe for attachment
to a head restraint.
–
Do not use any accessories, for in-
stance pillows, while driving.
Adjusting the height
–
To lower: press the button, arrow 1, and
push the head restraint down.
–
To raise: push the head restraint up.
After setting the height, make sure that the
head restraint engages correctly.
Removing
Only remove the head restraint if no one
will be sitting in the seat in question.
Seats, mirrors and steering wheel
Online Edition for Part no. 01405A53AA0 - II/22
1.
Fold down the rear seat backrest, refer
to page 230, in question.
2.
Pull head restraint up against the resist-
ance.
3.
Press the button, arrow 1, and pull the
head restraint out completely.
Installing
Proceed in the reverse order to install the
head restraint.
Mirrors
Exterior mirrors
General information
The front passenger's side exterior mirror is
more curved than the driver's side mirror.
Safety information
Warning
Objects reflected in the mirror are closer
than they appear. The distance to the road
users behind could be incorrectly esti-
mated, for instance while changing lanes.
There is a risk of accident. Estimate the
distance to the traffic behind by looking
over your shoulder.
CONTROLS
91
Need help?
Do you have a question about the CONVERTIBLE and is the answer not in the manual?
Questions and answers