Mini CONVERTIBLE Owner's Manual page 193

Adjusting the speed
Maintaining/storing the speed
Press or button in the interrupted
state.
When the system is switched on, the cur-
rent speed is maintained and stored as the
set speed.
The stored speed is displayed in the instru-
ment cluster.
If necessary, the Dynamic Stability Control
will be turned on.
Changing the speed
or button: press until the desired
speed is set.
If active, the displayed speed is stored and
the vehicle reaches the stored speed when
the road is clear.
– or button: each time it is
pressed to the point of resistance, the
desired speed increases or decreases by
approx. 1 mph/1 km/h.
– or button: each time it is
pressed past the resistance point, the
desired speed changes by a maximum of
5 mph/10 km/h.
– or button: press button to re-
sistance point and hold. The vehicle ac-
celerates or decelerates without pres-
sure on the accelerator pedal. After the
rocker switch is released, the vehicle
maintains its final speed. Pressing the
switch beyond the resistance point
causes the vehicle to accelerate more
rapidly.
Continuing cruise control
General information
An interrupted cruise control can be contin-
ued by calling up the stored speed.
Online Edition for Part no. 01405A53AA0 - II/22
Driving comfort
Make sure that the difference between cur-
rent speed and stored speed is not too large
before calling up the stored speed. Other-
wise, unintentional deceleration or acceler-
ation may occur.
Calling up the stored speed
Press the button on the steering
wheel.
The stored speed is reached again and main-
tained.
Displays in the instrument cluster
Indicator light
Instrument cluster without enhanced
features:
Depending on how the vehicle is
equipped, the indicator light in the instru-
ment cluster indicates whether the system
is switched on.
Set speed and stored speed
Instrument cluster without enhanced
features:
The desired speed is displayed to-
gether with the symbol.
– Display lights up green: system is active,
the display indicates the desired speed.
– Display lights up orange: system is in-
terrupted, the display indicates the
stored speed.
– No display: system is switched off.
CONTROLS
Instrument cluster with en-
hanced features:
The indicator in the instru-
ment cluster lights up: the sys-
tem is switched on.
193