Mini CONVERTIBLE Owner's Manual page 263

3. Screw the connection hose of the com-
pressor directly onto the tire valve stem.
4. Insert the connector into the power
socket in the vehicle interior.
5. With the ignition turned on or the en-
gine running, turn on the compressor
and let it run for a maximum of 10 mi-
nutes.
If a tire inflation pressure of at least
2 bar cannot be reached, contact a deal-
er's service center or another qualified
service center or repair shop.
If a tire inflation pressure of at least
2 bar is reached, see Minimum tire in-
flation pressure is reached.
6. Unscrew the connection hose of the
compressor from the tire valve.
7. Pull the connector out of the power
socket in the vehicle interior.
8. Stow the tire repair set in the vehicle.
Online Edition for Part no. 01405A53AA0 - II/22
Wheels and tires
Minimum tire inflation pressure is
reached
1. Unscrew the connection hose of the
compressor from the tire valve.
2. Pull the connector out of the power
socket in the vehicle interior.
3. Stow the tire repair set in the vehicle.
4. Immediately drive approx.
5 miles/10 km to ensure that the seal-
ing compound is evenly distributed in
the tire.
Do not exceed a speed of
50 mph/80 km/h.
If possible, do not drive at speeds less
than 12 mph/20 km/h.
Adjustment
1. Stop at a suitable location.
2. Screw the connection hose of the com-
pressor directly onto the tire valve stem.
3. Insert the connector into the power
socket in the vehicle interior.
MOBILITY
263