Mini CONVERTIBLE Owner's Manual page 186

CONTROLS
If distance control is switched off, refer to
page 188, higher desired speeds can be se-
lected as well.
Turning on/off and interrupting
cruise control
Turning on
Press the button on the steering
wheel.
Instrument cluster without enhanced
features:
Display in the instrument cluster
lights up.
Instrument cluster without enhanced
features:
Display in the instrument cluster
lights up. The current speed is adopted as
desired speed and displayed with icon.
Instrument cluster with en-
hanced features:
Display in the instrument
cluster lights up. The current
speed is adopted as desired
speed and displayed with icon.
Cruise control is active and maintains the
set speed.
If necessary, the Dynamic Stability Control
will be turned on.
Turning off
With the Stop&Go function for Steptronic
transmissions: when switching off while
stationary, depress the brake pedal simulta-
neously.
Press the button on the steering
wheel.
The displays turn off. The stored set speed
is deleted.
186
Driving comfort
Online Edition for Part no. 01405A53AA0 - II/22
Interrupting manually
Press the button on the steering
wheel.
With the Stop&Go function for Steptronic
transmission: when interrupting while sta-
tionary, depress the brake pedal simultane-
ously.
Interrupting automatically
The system is automatically interrupted in
the following situations:
– When the driver applies the brakes.
– Manual transmission: when the clutch
pedal is depressed for a few seconds or
released while a gear is not engaged.
– If selector lever position N is set.
– When Dynamic Traction Control is acti-
vated or Dynamic Stability Control is de-
activated.
– When the Dynamic Stability Control is
adjusting.
– If the detection range of the camera is
impaired, for instance by contamination,
heavy precipitation or blinding glare
from the sun.
– Manual transmission: if the vehicle in
front decelerates below a speed of ap-
prox. 20 mph/30 km/h.
– With the Stop&Go function for Step-
tronic transmissions: following a sta-
tionary period of approx. 3 seconds, af-
ter the vehicle was braked to a stop by
the system.
Adjusting the speed
Maintaining/storing the speed
Press or button in the interrupted
state.
When the system is switched on, the cur-
rent speed is maintained and stored as the
set speed.