Technical Data - Mini CONVERTIBLE Owner's Manual

REFERENCE

Technical data

Vehicle features and options
This chapter describes all standard, country-
specific and optional features offered with
the series. It also describes features and
functions that are not necessarily available
General information
The technical data and specifications in the
Owner's Manual are used as guidance val-
ues. Vehicle-specific data may deviate from
this, for instance due to the optional equip-
ment chosen, national-market version, or
country-specific measuring process. De-
Dimensions
The dimensions can vary depending on the
model version, equipment version or coun-
try-specific measurement procedure.
MINI Convertible
Width with mirrors
Width without mirrors
Height
Length
Wheelbase
Smallest turning radius diam.
302
Technical data
Online Edition for Part no. 01405A53AA0 - II/22
in your vehicle, e.g., due to the selected op-
tions or country versions. This also applies
to safety-related functions and systems.
When using these functions and systems,
the applicable laws and regulations must be
observed.
tailed values can be found in the approval
documents, on signs on the vehicle or can
be obtained from a dealer's service center
or another qualified service center or repair
shop.
The height of the vehicle can also differ,
e.g., due to tires and vehicle load.
in/mm
in/mm
in/mm
in/mm
in/mm
ft/m
75.9/1,928
68/1,727
55.7/1,415
152.8/3,880
98.2/2,495
35.4/10.8