Mini CONVERTIBLE Owner's Manual page 283

4. Pull the wiper blade down out of the
holder on the wiper arm, arrow 1.
5. Pull the wiper blade free from the holder
of the wiper arm, arrow 2.
6. Insert and lock a new wiper blade in re-
verse order.
7. Fold in the wiper arm.
Light and bulb replacement
General information
Lights and bulbs
Lights and bulbs make an essential contri-
bution to driving safety.
Except for the reversing light, all headlights
and lights are designed in LED technology.
The manufacturer of the vehicle recom-
mends that you have appropriate work per-
formed by a dealer's service center or an-
other qualified service center or repair shop
if you are unfamiliar with it or if it has not
been described here.
A replacement bulb set is available from a
dealer's service center or another qualified
service center or repair shop.
Follow the safety information, refer to
page 283.
Light-emitting diodes (LEDs)
Some items of equipment use light-emitting
diodes installed behind a cover as a light
Replacing components
Online Edition for Part no. 01405A53AA0 - II/22
source. These light-emitting diodes are re-
lated to conventional lasers and are offi-
cially designated as Class 1 light-emitting
diodes.
Follow the safety information, refer to
page 283.
Safety information
Lights and bulbs
Warning
Bulbs can get hot during operation. Con-
tact with the bulbs can cause burns. There
is a risk of injury. Only change bulbs after
they have cooled off.
Warning
Work on switched-on lighting systems can
cause short circuits. There is a risk of in-
jury or risk of damage to property. When
working on the lighting system, switch off
the lights in question. If necessary, heed
the bulb manufacturer's instructions.
NOTICE
Dirty bulbs have a reduced service life.
There is a risk of damage to property,
among other potential damage. Do not
hold new glass bulbs with your bare
hands. Use a clean cloth or something sim-
ilar, or hold the bulb by its base.
MOBILITY
283