Configuring The Machine - Canon 1238P Getting Started

Quick Setup
En

Configuring the Machine

Configuring the Initial Settings of
the Machine
The design of the operation panel differs
depending on the model of your machine. The
descriptions of the operation panel in this guide
basically presumes that the model is 1238P.
N O T E
Parts and functions of the operation panel.
P.126 "Start the Operation from the
Operation Panel"
About Application Library*
Application Library is an application that
allows you to use useful functions for
routine jobs or other convenient functions
in a one-touch operation without
necessity of making functional settings
every time. You can access each
registered function by simply pressing the
appropriate button displayed in the Home
screen. For the respective function, see the
description displayed in the Setup Guide.
* This function may not be available, depending
on the model of the machine.
1.
2.
Configure the initial settings, according to the
screen.
• Set the language and country/region.
• Set the time zone and current date/time.
• Configure the settings to prevent
unauthorized access.
• For the purpose of confirmation, enter the
same PIN twice.
4
Configure the settings in the following order.
Configuring the Method of
Connecting to a Computer
Before starting the configuration
• The machine cannot be connected to
both wired and wireless LANs at the
same time.
• If the machine is connected to an
unsecured network, your personal
information might be leaked to a third
party. Please be aware and careful of this.
• The machine does not come with a
router. Please have one ready, if necessary.
• Even in an environment without wireless
LAN router, you can use Access Point
Mode to make a wireless connection to
the machine directly from your mobile
device (Direct Connection).
User's Guide
Specifying the connection method
• To connect via wireless LAN : <Yes>
• To connect via wired LAN or USB : <No>
To connect via wireless LAN
1.
Make sure that the computer is connected to a
router properly.
2.
Check the network settings on the computer.