Cold Start (Initialize); Eeprom Test Mode; Auto Standby Test Mode - Denon DCD-F109 Service Manual

Compact disc player

Hide thumbs Also See for DCD-F109:

Table of Contents

q Number of heat run is display

(1) Press the 9 button while the error is displayed.

(2) No. heat runs is displayed for 5 seconds, the error display reappears.

(XXXX : No. of heat run repetitions)

w The track no. and time when the error occurred is displayed.

(1) Press the 8 button while the error is displayed.

(2) The track no. and time when the error occurred is displayed for 5 seconds, then error display reappears.

01Tr

4. COLD START (INITIALIZE)

(1) AC is turned on while pressing the 5 and 9 button same time on this unit..

INITIALIZE

(2) The system is reset, and once this is completed the unit is set to the normal mode.

DIMMER : 100%

DISC/USB : DISC

REMOTE/BROWSE : REMOTE

(3) The laser current initial value and laser accumulated on time is not cleared

(1) AC is turned on while simultaneously pressing POWER and DISC/USB button.

(2) TEST start (turn off the POWER LED).

(3) After EEPROM TEST, in the case of OK, LED lights to the green.

(4) After EEPROM TEST, in the case of NG, LED lights to the red.

(5) Mode is cancelled with POWER OFF.

(1) AC is turned on while pressing the 5 and 8 button same time on this unit.(Entering the Service mode)

(2) T he AUTO STANDBY timer is set to 4 minutes.

AUTO STANDBY

TEST MODE

XXXX

01:47

Table of Contents