Table of Contents
Advertisement
1. SERVICE MODE
(1) AC is turned on while pressing the 5 and 2 button same time on this unit.(Model name display)
DCD-F109
1.1. Version No. of main μ-com Display mode
(1) Press the 9 button.
Ver xxxx
(**** : Version number of main μ-com)
1.2. Version No. of USB μ-com Display mode
(1) Press the 9 button while version No. of main μ-com is displayed.
USB_Ver ****
(**** : Version number of USB μ-com)
1.3. FLD check mode
(1) When display is version No. of USB μ-com and the 9 button is pressed, turn on the entire display is flashing with
an interval of about 1 second.
(2) Press the 9 button again in the turn on each grid of FLD. (Each grid is displayed at interval of 1 second.)
2. CD TEST MODE
(1) AC is turned on while pressing the 5 and 2 button same time on this unit.(Model name display)
(2) Press the 2 and 1 / 3 button same time while version display, FLD check mode and heat runmode.( CD TEST
MODE display)
• 13 flashing
00 CD TEST MODE
2.1. Disc loading
(1) Press the 5 button to open the tray.
(2) Set a disc on the tray, then press the 5 button again to close the tray.
22
Advertisement
Table of Contents
