Tektronix TMSST1 Instruction Manual
  1. Manuals
  2. Brands
  3. Tektronix Manuals
  4. Computer Hardware
  5. TMSST1
  6. Instruction manual
Tektronix TMSST1 Instruction Manual

Tektronix TMSST1 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Instruction Manual
TMSST1
775-Pin Socket Hardware Support
071-1315-00
www.tektronix.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TMSST1 and is the answer not in the manual?

Questions and answers

Related Manuals for Tektronix TMSST1

Summary of Contents for Tektronix TMSST1

  • Page 1 Instruction Manual TMSST1 775-Pin Socket Hardware Support 071-1315-00 www.tektronix.com...
  • Page 2 Copyright © Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supercedes that in all previously published material. Specifications and price change privileges reserved. Tektronix, Inc., P.O. Box 500, Beaverton, OR 97077...
  • Page 3 Tektronix, with shipping charges prepaid. Tektronix shall pay for the return of the product to Customer if the shipment is to a location within the country in which the Tektronix service center is located. Customer shall be responsible for paying all shipping charges, duties, taxes, and any other charges for products returned to any other locations.

  • Page 5: Table Of Contents

    ..........2- -3 TMSST1 775-Pin Socket Hardware Support...
  • Page 6 ........4- -2 Index TMSST1 775-Pin Socket Hardware Support...
  • Page 7 ..... . 2- -5 Table 2- -4: Certifications and compliances ..... 2- -6 TMSST1 775-Pin Socket Hardware Support...
  • Page 8 Table of Contents TMSST1 775-Pin Socket Hardware Support...

  • Page 9: General Safety Summary

    Do Not Operate in Wet/Damp Conditions. Do Not Operate in an Explosive Atmosphere. Keep Product Surfaces Clean and Dry. Provide Proper Ventilation. Refer to the manual’s installation instructions for details on installing the product so it has proper ventilation. TMSST1 775-Pin Socket Hardware Support...
  • Page 10 WARNING indicates an injury hazard not immediately accessible as you read the marking. CAUTION indicates a hazard to property including the product. Symbols on the Product. The following symbols may appear on the product: CAUTION WARNING Protective Ground Refer to Manual High Voltage (Earth) Terminal TMSST1 775-Pin Socket Hardware Support...

  • Page 11: Service Safety Summary

    Use Care When Servicing With Power On. Dangerous voltages or currents may exist in this product. Disconnect power, remove battery (if applicable), and disconnect test leads before removing protective panels, soldering, or replacing components. To avoid electric shock, do not touch exposed connections. TMSST1 775-Pin Socket Hardware Support...
  • Page 12 Service Safety Summary viii TMSST1 775-Pin Socket Hardware Support...

  • Page 13: Preface

    If you are not familiar with operating Microprocessor support products, you need to supplement this instruction manual with information on basic operations from the Tektronix logic analyzer online help to set up and run the support product. Manual Conventions This manual uses the following conventions: H The terms “master”...

  • Page 14: Contacting Tektronix

    This phone number is toll free in North America. After office hours, please leave a voice mail message. Outside North America, contact a Tektronix sales office or distributor; see the Tektronix web site for a list of offices. TMSST1 775-Pin Socket Hardware Support...

  • Page 15: Getting Started

    Getting Started...

  • Page 17: Product Description

    H Caring for and maintaining the probe adapter, see page 1- -14 Product Description The TMSST1 probe adapter is an interposer design that allows the logic analyzer to acquire data from a Microprocessor in the operating environment with little effect on the target system.

  • Page 18: P6860 Probes

    Refer to the P6810, P6860, and P6880 Logic Analyzer Probes Instruction Manual, Tektronix part number 071-1059-XX, for more information. You can access this manual from the Tektronix.com web site. You can also find informa- tion about the P6860 probes in the logic analyzer online help.

  • Page 19: Labeling P6860 Probes

    Apply labels using the instructions described in the P6860 High Density Logic Analyzer Probe Label Instructions, Tektronix part number 071-1123-XX. This manual can be accessed from the Tektronix.com web site. This information is also located in the logic analyzer online help.

  • Page 20: Disabling The Cache

    To prevent harm to yourself or damage to the preprocessor unit, do not open the preprocessor unit. There are no operator serviceable parts inside the preproces- sor unit. Refer servicing of internal parts in the preprocessor unit to Tektronix authorized personnel only. External parts may be replaced by qualified service personnel.

  • Page 21: Figure 1- -2: Attach The Custom Load Plate To The Target-System Socket

    T with the Tyco socket. Caution: To prevent damage to the socket, do not touch the springs in the socket. Figure 1- - 2: Attach the custom load plate to the target-system socket 1- - 5 TMSST1 775-Pin Socket Hardware Support...

  • Page 22: Figure 1- -3: Connect The Microprocessor To The Probe-Head Socket

    1’s on the probe head and target system are correctly aligned. Pin 1 Close load plate. Close the load lever. Figure 1- - 3: Connect the microprocessor to the probe-head socket 1- - 6 TMSST1 775-Pin Socket Hardware Support...

  • Page 23: Figure 1- -4: Attach The Probe Head To The Target System

    Figure 1- - 4: Attach the probe head to the target system 1- - 7 TMSST1 775-Pin Socket Hardware Support...

  • Page 24: Removing The Probe Head From The Target System

    It is not necessary to power off the logic analyzer. 2. Reverse the steps in Figures 1- -2 through 1- -5 to remove the probe head. 3. Store the probe head (see page 1- -15.) 1- - 8 TMSST1 775-Pin Socket Hardware Support...

  • Page 25: Applying Lai Labels

    Align and place the labels in the label indents. Repeat for all steps. Probe-head LAI cable Blank Module Match the color and the channel name. Blank Figure 1- - 6: Apply LAI labels 1- - 9 TMSST1 775-Pin Socket Hardware Support...

  • Page 26: Connect The Probes And Lai Cables

    If you need to apply labels to the LAI cables, see page 1- -9 Figure 1- -7 shows a P6860 probe, an LAI cable, and the preprocessor unit. P6860 probe LAI cable Preprocessor unit Figure 1- - 7: LAI cable, P6860 probe, and preprocessor unit 1- - 10 TMSST1 775-Pin Socket Hardware Support...

  • Page 27: Figure 1- -8: Lai Cable, P6860 Probe, And Module Configurations

    2. Repeat step 1 to make LAI cable connections between Slave1 and Slave2 modules and the connector labels on the preprocessor unit. 1- - 11 TMSST1 775-Pin Socket Hardware Support...

  • Page 28: P6860 Probes

    LED lights on the front of the preprocessor unit, indicating that the probe adapter is active. 5. Power on the target system. To remove power from the target system and the probe adapter, reverse the preceding steps. You can skip step 1. 1- - 12 TMSST1 775-Pin Socket Hardware Support...

  • Page 29: Logic Analyzer Software Compatibility

    NOTE. Before you install any software, it is recommended you verify that the microprocessor support software is compatible with the logic analyzer software. To install the software on your Tektronix logic analyzer, follow these steps: 1. Insert the disc in the disc drive.

  • Page 30: Care And Maintenance

    Tektronix authorized personnel only. External parts may be replaced by qualified service personnel. Fuses The fuses in the preprocessor unit are not replaceable by the customer (operator). If the probe adapter is not functioning correctly, contact your Tektronix sales representative. 1- - 14 TMSST1 775-Pin Socket Hardware Support...

  • Page 31: Short-Term Storage

    3. Using nonstatic generating tape, tape the pin-protector board to the pin header on the bottom of the probe head. 4. Store the probe head in the black case it was shipped in. Figure 1- - 9: Nonspecific probe head and case 1- - 15 TMSST1 775-Pin Socket Hardware Support...

  • Page 32: Long-Term Storage

    LAI cables from the top of the preprocessor unit. 2. Follow Figures 1- -10 through 1- -14 to repackage the probe adapter. Figure 1- - 10: Use static-shielding bags. Figure 1- - 11: Place foam in the cardboard carton 1- - 16 TMSST1 775-Pin Socket Hardware Support...

  • Page 33: Figure 1- -12: Place The Preprocessor Unit In The Cardboard Carton

    Figure 1- - 14: Place the foam and probe head in place 3. Place the accessory box on top of the foam. 4. Close and tape the cardboard carton. To ship the probe adapter, Refer to Shipping the probe Adapter. 1- - 17 TMSST1 775-Pin Socket Hardware Support...

  • Page 34: Shipping The Probe Adapter

    2. Follow Figures 1- -10 through 1- -14 starting on page 1- -16 to repackage the probe head and preprocessor unit. 3. If you are shipping a probe adapter to a Tektronix service center for warranty service, attach a tag to the probe adapter showing the following: H Owner’s name and address...

  • Page 35: Specifications

    Specifications...

  • Page 37: Circuit Description

    775-Pin Socket support. Circuit Description The TMSST1 probe adapter hardware uses a custom ASIC to preprocess all signals on the microprocessor before the signals are captured by the logic analyzer. The custom ASIC performs the following functions: H Latches signals within a narrow valid window...

  • Page 38: Derived Signals

    Specifications Derived Signals The TMSST1 probe adapter hardware derives several custom signals from the front-side bus signals captured by the ASIC. These signals are used by the logic analyzer support software to provide clocking, transaction phase linking, and disassembly. Following is a description of these custom signals: PHASE_D.

  • Page 39: Loading Diagrams

    0.7 pF 75 Ω 0.4 pF 75 Ω ~44’’ ~1300 mils 4.18 ns 213 ps Mated Receiver Samtec 0.7 pF 0.7 pF 0.7 pF Figure 2- - 1: Electrical load model for typical signals 2- - 3 TMSST1 775-Pin Socket Hardware Support...

  • Page 40: Specification Tables

    Figure 2- - 3: Receiver load model Specification Tables These specifications are for a probe adapter connected between a compatible Tektronix logic analyzer and a target system. The signal voltage swing in your target system must be at least 600 mV around the GTL+ reference voltage.

  • Page 41: Table 2- -2: Electrical Specifications For The Ac Input To The Preprocessor Unit

    Minimum operating --55 °C to +75 °C (--67 °F to +167 °F) Nonoperating Humidity 10 to 90% relative humidity, noncondensing Altitude Operating 3 km (10,000 ft) maximum Nonoperating 12 km (40,000 ft) maximum 2- - 5 TMSST1 775-Pin Socket Hardware Support...

  • Page 42: Table 2- -4: Certifications And Compliances

    7.62 cm (3 in) Bottom, right side 0.635 cm (0.250 in) Designed to meet Tektronix standard 062-2847-00 class 5. Not to exceed Microprocessor thermal considerations. Customer supplied cooling might be required across the CPU. Table 2- - 4: Certifications and compliances...

  • Page 43: Figure 2- -4: Dimensions Of The Probe Head

    1.625 mm (0.064 in) 17.20 mm (0.677 in) 1.88 mm 1.88 mm (0.074 in) (0.074 in) 11.55 mm 4.57 mm (0.455 in) (0.180 in) Figure 2- - 4: Dimensions of the probe head 2- - 7 TMSST1 775-Pin Socket Hardware Support...

  • Page 44: Figure 2- -5: Dimensions Of The Preprocessor Unit

    Figure 2- - 5). 474.32 mm (18.674 in) 425.45 mm (16.750 in) 420.37 mm (16.550 in) 139.70 mm 160.27 mm (5.500 in) (6.310 in) Figure 2- - 5: Dimensions of the preprocessor unit 2- - 8 TMSST1 775-Pin Socket Hardware Support...
  • Page 45 Reference...

  • Page 47: Reference Tables

    Reference Tables The TMSST1 software floppy contains the following reference tables. Viewing a table is not a requirement when preparing the module for use. You can view the reference tables without connecting the TLA to your target system. These tables are provided to assist you when you are debugging a target system.

  • Page 48: To Extract Groups

    Export Channel Information and the Export Group Information boxes are checked. The Field delimiter box controls how the tables are displayed. See the Tektronix logic analyzer online help for more information. 6. Select Export. 3- 2 TMSST1 775-Pin Socket Hardware Support...

  • Page 49: Replaceable Parts List

    Replaceable Parts List...

  • Page 51: Parts Ordering Information

    For more information about the module exchange program, call 1-800-833-9200. Outside North America, contact a Tektronix sales office or distributor; see the Tektronix web site for a list of offices: www.tektronix.com. Module Repair and Return. You may ship your module to us for repair, after which we will return it to you.

  • Page 52: Using The Replaceable Parts List

    Using the Replaceable Parts List This section contains a list of the mechanical and/or electrical components that are replaceable for the TMSST1 Hardware Support package. Use this list to identify and order replacement parts. The following table describes each column in the parts list.
  • Page 53 4241 BUSINESS CENTER DR FREMONT, CA 94538 TK6585 TRESKE PRECISION MACHINE INC 14140 SW GALBREATH DRIVE SHERWOOD, OR 97140 80009 TEKTRONIX INC 14150 SW KARL BRAUN DR BEAVERTON, OR 97077--0001 PO BOX 500 4- - 3 TMSST1 775-Pin Socket Hardware Support...
  • Page 54 Serial no. Mfr. index number effective discont’d Name & description code Mfr. part number number 4--1--1 672--5701--50 CIRCUIT BD ASSY; TMSST1 PROBE HEAD W/CABLES & 80009 672--5701--50 PADDLE BD;TESTED 386--7379--00 BRACKET SUPPORT;FILTER MOUNT 386737900 200--4843--00 COVER,SOCKET;TMSST1 TK6585 200--4843--00 386--7400--00 LOAD PLATE,BOTTOM;TYCO;ELECTROLESS NICKEL FINISH;S7 TOOL STEEL;TMSST1...

  • Page 55: Figure 4- -1: Probe Adapter Exploded View

    Replaceable Parts List Figure 4- - 1: Probe adapter exploded view 4- - 5 TMSST1 775-Pin Socket Hardware Support...
  • Page 56 Replaceable Parts List 4- - 6 TMSST1 775-Pin Socket Hardware Support...

  • Page 57: Index

    Index...
  • Page 59 Master module, definition, ix Electrical specifications, 2- -1, 2- -4 Modules connections, 1- -2 AC adapter, 2- -5 clock rate, 2- -4 power requirements, 2- -4 setup time, 2- -4 Options, 1- -3 Index- - 1 TMSST1 775-Pin Socket Hardware Support...
  • Page 60 TLA7AX module, measurements, 1- -2 address bus, 1- -3 clock rate, 1- -3 data bus, 1- -3 disabling the cache, 1- -4 URL, Tektronix, x Service support, contact information, x Web site address, Tektronix, x Index- - 2 TMSST1 775-Pin Socket Hardware Support...

Table of Contents