Tektronix XD88F14 Installation Manual

TE. K INFORMATION Part No. 070-7689-01
XD88/01/05/20/30/35 MASS STORAGE
F-KIT INSTALLATION
WARNING
The following installation instructions are for use by qualified personnel
only. To avoid personal injury, do no* perform any servicing unless vou are
qualified to do so.
About This Manual
This manual contains the instruction procedures required to install one of the mass
storage F-kits, Fl4, FMS, or FRT, into an XD88/01, 05. 20, 30, or 35. The
headings for the procedures are listed here in the order in which they must be
performed.
Backing Up the System
Removing the Compute Module Front Cover
Removing the Power Switch and EMI Shield
Removing the Mass Storage Subassembly
. Installing the F-kits
When strapping any of the devices, refer to the heading "Device Strapping and
Addressing" at the end of this manual.
Please read through the instructions in this manual and become familiar with the
procedures before you begin. Unless a specific re-assembly procedure is given,
re-assemble the workstation by reversing the disassembly procedure.
Related Documentation
The following manuals contain additional information related to these installation
instructions:
« XD88 Field Service Manual
« XD&88 Series System Administrator' s Guide
« XDS88F42 Compute Module Expansion Upgrade Instructions
Copynght S 1989 by Tektronix, inc, Beaverton, Oregon
First Printing JUN 1989 Po
Tektronc<
Revised AUG 1990
COMMITTED TO EXCELLENCE
Microfiche scan by vintageTEK - Your donations help support the museum - vintagetek.org