Product Description And Specifications; Intended Use; Product Features - Fein ASBS18-10AS Manual

1 609 92A 7HF • 28.6.22 • T
en
16
force applied externally. An internal short
circuit may occur, causing the battery to burn,
smoke, explode or overheat.
When the battery is not in use, keep it away
u
from paper clips, coins, keys, nails, screws
or other small metal objects that could
make a connection from one terminal to
another. A short circuit between the battery
terminals may cause burns or a fire.
Only use the AMPShare battery in the
u
manufacturer's products or those of the
AMPShare partners. This is the only way in
which you can protect the battery against dan-
gerous overload.
Only charge the batteries using chargers
u
recommended by the manufacturer. A char-
ger that is suitable for one type of battery may
pose a fire risk when used with a different bat-
tery.
Protect the battery against heat,
e.g. against continuous intense sun-
light, fire, dirt, water and moisture.
There is a risk of explosion and short-
circuiting.
Do not screw or nail any signs or labels
u
onto the dust extractor. Damaged insulation
offers no protection against electric shocks.
Use stick-on labels instead.
Symbols
English
The following symbols may provide you with im-
portant information pertaining to the use of your
dust extractor. Please take note of these symbols
and their meaning. Knowing what these symbols
mean will help you to use your extractor more
effectively and more safely.
Symbols and their meaning
WARNING! Read all the safety
and general instructions. Fail-
ure to observe the safety and
general instructions may result in
electric shock, fire and/or serious
injury.
WARNING! The dust extractor
contains dust particles that
pose a risk to health. Emptying
and maintenance procedures,
including the disposal of dust
containers, should only be car-
ried out by professionals. Suit-
able protective equipment is
required. Do not operate the
dust extractor unless the com-
plete filter system is correctly
inserted. Otherwise, you are
putting your health at risk.
Symbols and their meaning
Dust extractor from dust class L
in accordance with IEC/EN
60335-2-69 for the dry extrac-
tion of harmful dusts with an ex-
posure limit of > 1 mg/m³
Product Description and
Specifications
English
Please observe the illustrations at the beginning
of this operating manual.

Intended Use

English
The dust extractor is intended for collecting, va-
cuuming, conveying and separating non-flam-
mable dry dusts, non-flammable liquids and a
water-air mixture. The dust extraction capability
of the dust extractor has been tested and corres-
ponds to dust class L. It is suitable for the in-
creased demands in professional use, e.g. in
trade, industry and workshops.
Dust extractors from dust class L in accordance
with IEC/EN 60335‑2‑69 may only be used to
vacuum and extract harmful dust with an expos-
ure limit of > 1 mg/m³.
Only use the dust extractor if you can fully evalu-
ate all functions and carry them out without re-
strictions, or if you have received corresponding
instructions.
The bagless filter system removes the need to
use dust bags. Dirt is collected on the inside wall
of the container.

Product Features

English
The numbering of the product features refers to
the representation of the vacuum cleaner on the
graphic pages.
(1) Container
(2) Catch for top part of dust extractor
(3) On/off button
(4) Battery charge indicator
(5) Top part of dust extractor
(6) Carrying handle
(7) Adapter for vacuum hose/floor nozzle
bracket
(8) Hose adapter
(9) Adapter for suction tube/crevice nozzle
bracket
(10) Battery compartment cover release but-
ton
(11) Battery compartment cover
(12) Vacuum hose
(13) Dust extraction adapter
(14) Curved nozzle