the Multipoint Power Recorder and the other end into your
computer.
An Ethernet wiring diagram is provided in Appendix D. If you
need additional information about proper wiring of Ethernet,
consult your network administrator.
Checking Connections Before Restoring
Power
Before you restore power, check all the connections:
1. Make sure all terminals are tight.
2. Make sure current and voltage wires are paired correctly.
Restoring Power
You can restore power after connecting voltage, current, and Ethernet
to the Multipoint Base Unit.
WARNING: To avoid potential injury or
equipment damage, make sure you have checked
your wiring before restoring power to your system.
Installing the Multipoint with
Acquisition Unit Model 1941 or 1948
17