Table of Contents
Advertisement
Installing the Multipoint with
Acquisition Unit Model 1941 or 1948
Connecting to the Meter Power Source
You can connect to the Multipoint meter power using either AC or
DC. The meter power requires 10-15 volts DC, negative ground, or
100 -240 volts AC. You may connect to both AC and DC at the same
time. No switch settings are required.
k, do not remove cover.
alified service personnel.
10
Warning: Before connecting the Multipoint Power
Recorder to a power source the ground wire should be
securely screwed to the Safety ground stud.
Made in U.S.A
No Connection
+10 to 15V DC
DC return
No Connection
AC Neutral
AC Line
Advertisement
Table of Contents
