Table of Contents
Advertisement
en
Customised setting options
When button C is briefly pressed, the
preparation temperature is increased by
5°C. The temperature increases up to the
pre-configured maximum value and then
returns to the pre-configured minimum value.
When button C is pressed for a slightly
longer period, the temperature is increased
by 10°C.
4. Once the desired preparation
temperature is displayed, press
button G.
The preparation programme with the set
preparation temperature is started.
If the temperature needs to be adjusted
individually for all preparation steps in a
selected programme, then repeat points 2 to
4 prior to starting the respective preparation
step.
Note: These settings are not saved. If this
preparation programme is selected again,
the pre-configured preparation temperature
will be shown in the display once more.
Setting the steam pressure
For preparation programmes with pre-set
steam pressure function, the temperature
can be selected via "low steam pressure"
[ K ] or "high steam pressure" [ L ].
1. In function selection mode, keep
pressing button D until the desired
preparation programme is selected.
The corresponding LED lights up in the
control panel and the pre-configured
preparation time for this preparation
programme is shown. The indicator
"low steam pressure" [ K ] or "high steam
pressure" [ L ] additionally lights up.
Note: If [ K ] or [ L ] does not light up, the
steam pressure function is not available for
the selected programme.
2. Press button L to switch between [ K ]
and [ L ].
3. If the desired steam pressure is
displayed, press button G.
The preparation programme is started with
the set steam pressure function.
44
Note: These settings are not saved. If this
preparation programme is selected again,
the set steam pressure function will be
shown in the display once more.
[
] (my recipe) (manual)
Quick setting mode for customising the
steam pressure function, preparation time
and temperature setting for a cooking
process.
In function selection mode, button B and
the indicator [
permanently lit. Button G flashes. "00:00" is
shown in the display.
Note: In order to switch on the steam
pressure function, the pressure locking
handle must be closed (N). The indicator
[ K ] lights up.
Setting the preparation time
1. Press button F once.
"00:00" flashes in the display.
2. Keep pressing button F until the desired
preparation time is displayed.
Setting the preparation temperature or
steam pressure
3. Without steam pressure function: The
pressure locking handle must be opened
(M). Press button C once. "0000"
flashes in the display. Button C must then
be pressed repeatedly until the desired
preparation temperature is displayed.
or
With steam pressure function: The
pressure locking handle must be closed
(N). Press button L to switch between
[ K ] and [ L ].
4. Press button G to start with the selected
settings.
The appliance heats up the pan until the
target temperature or the steam pressure is
reached.
Once the target temperature or steam
pressure is reached, the lines go out and the
next preparation time is shown in the display.
The preparation process starts automatically.
] (my recipe) are
Advertisement
Chapters
Table of Contents
