Advertisement
Quick Start Guide: ASSP EASY Motor Control Kit
•
Please select the .ini file, then select "COM port" or "Auto detect" options and finally configure the baud
rate setting which must be set to 19200 or Auto- detect as shown in the screenshot
•
Save the settings for future sessions.
•
If the settings are set correctly, after saving the status will change from 'Disconnected' (black font) to
'Connected' (green font) indicating the connection with the kit is established successfully.
Once connected the GUI can be used to control the motor manually using the "RPM Control" knob. With this
function the user can start, stop, and set the direction and speed of the motor, whilst observing its
performance parameters within the "system display" windows provided by the GUI.
ASSP EASY Motor Control Kit Quick Start Guide – rev. 1.0
"RPM Control"
knob
5
Advertisement
