Advertisement
Quick Start Guide: ASSP EASY Motor Control Kit
For full details of power supply options please refer to Chapter 5 of the ASSP EASY Motor Control Solution
User Manual.
4. For initial setup of the Renesas ASSP EASY Motor Control Kit the first method must be used (USB powered
option 'a'). Ensure that Jumpers PN2 and PN3 are correctly configured as described below.
4. PC Graphical User Interface (GUI) Software Installation
The PC GUI supports 32-bit and 64-bit Windows™ operating systems (Windows 10, 8.1, 8, 7, Vista).
Note: Windows™ Vista, 7, 8 and 10 users must install the software with administration rights.
experience a "User Account Control" dialog box pop-up. In such case, enter the administrator password and
click <OK>. Else, to install right-click on the "MotorControlSetup_x.x.x.exe" and select "Run as administrator"
or double-click on <MotorControlSetup_x.x.x.exe> and then follow the on-screen instructions until reaching
the following installer screen and then click <Finish> to complete installation.
A Motor Control GUI icon (see below) will be available on the desktop:
ASSP EASY Motor Control Kit Quick Start Guide – rev. 1.0
Jumper between pin
4,6: power supply
comes from USB
step-up. The VBUS is
14Vdc. NO
ISOLATION BETWEEN
POWER AND SERIAL
COMMUNICATION
3
User may
Advertisement
