Toyota PRIUS Manual page 94

1-2. Charging
STEP 5
STEP 6
STEP 7 Install the plug-cord connector cap and release key to the plug-cord
that has been removed.
Store the plug-cord in a safe, clean and dry place, and make sure
that the release key is not lost.
94
PRIUS PHV_OM_OM47831E_(EE)
With the release key fully inserted into the
release slot of the CCID (Charging Circuit
Interrupting Device), turn the plug-cord
connector nut of the plug-cord to remove
the cord.
Nut
After the plug-cord is removed, remove
the release key.
Align the protrusion
(Charging Circuit Interrupting Device),
with the groove of the replacement plug-
cord, insert the plug-cord into the CCID
(Charging Circuit Interrupting Device),
and then turn the plug-cord connector nut
of the plug-cord to install it.
Turn the plug-cord connector nut of the
plug-cord in the opposite direction of
removal until a click sound is heard and
the plug-cord is secured.
of the CCID