Toyota PRIUS Manual page 93

Replacing the plug-cord (for Europe)

The plug-cord can be replaced using the following procedure.
STEP 1
STEP 2
Release
key
STEP 3
STEP 4
Release
slot
PRIUS PHV_OM_OM47831E_(EE)
Prepare the charging cable (P. 91) and
the replacement plug-cord.
Pull out the release key.
Remove the plug-cord connector cap.
Insert the release key into the release slot
of the CCID (Charging Circuit Interrupting
Device).
Insert the release key in the direction
shown in the illustration.
1-2. Charging
1
93