Tilt Support Lever For Power Trim And Tilt Or Hydro Tilt Model; Tilt Support Lever For Manual Tilt Model; Top Cowling Lock Lever(S) (Turn Type) - Yamaha 40V Owner's Manual

Basic components
1
1. Tilt lock lever
To lock it, set the tilt lock lever in the "
(lock) position. To release, push the tilt lock
lever in the " " (release) position.
EMU26340
Tilt support lever for power trim and
tilt or hydro tilt model
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
clamp bracket.
EMU30200
Tilt support lever for manual tilt
model
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
clamp bracket.
16
ZMU03099
EMU26372

Top cowling lock lever(s) (turn type)

To remove the engine top cowling, turn the
"
lock lever(s) and lift off the cowling. When in-
stalling the cowling, check to be sure it fits
properly in the rubber seal. Then lock the
cowling again by returning the lever(s) to the
lock position.
1. Top cowling lock lever(s)
ZMU03194
1. Top cowling lock lever(s)
ZMU03358
1
ZMU03827
1
ZMU02596