The Golden Rules For Care; General Cleaning - Titan TTT831HDC Instructions Manual

EN
Care and maintenance

The golden rules for care

WARNING! Always switch the product off, remove the battery pack
(32) and let the product cool down before performing inspection,
maintenance and cleaning work!
1. Keep the product clean. Remove debris from it after each use and before
storage.
2. Regular and proper cleaning will help ensure safe use and prolong the life of
the product.
3. Inspect the product before each use for worn and damaged parts. Do not
operate it if you find broken and worn parts.
WARNING! Only perform repairs and maintenance work according to
these instructions! All further works must be performed by a qualified
specialist!

General Cleaning

1. Clean the product with a damp cloth and pH-neutral soap. Use a brush for areas
that are hard to reach.
2. In particular clean the air vents (15a) after every use with a cloth and brush.
3. Remove stubborn dust with high pressure air (max. 3 bar).
NOTE: Do not use chemical, alkaline, abrasive or other aggressive
detergents or disinfectants to clean this product as they might be
harmful to its surfaces.
4. Check for any damage and wear. Repair damages in accordance with this
instruction manual or take it to an authorised service centre before using the
product again.
42
TTT831HDC-Li by TITAN