Thermo Scientific BF51841C Operation Manual page 47

5. Press and release the SET/ENT button to access the six parameters specific to
the communications option. Compare the displayed values to those in
"UT150 Communication
as needed.
6. Press and hold SET/ENT for 3 seconds to exit the Setup Parameters Menu.
Loss of power to the Excess Temperature Controller will not change the setpoint
or hysteresis value. However, the last recorded Exceeded Temperature Duration
Time and peak Exceeded Temperature will be lost.
Thermo Scientific
Parameters". Make adjustments to the Adr parameter
Communication Option
Addresses for Multiple Controllers
Table 4.
8-5